Hot-O-Matic #3HT Baptistry Water Heating & Circulation System

Provide Evenly Controlled Temperatures To Your:
Carpet Cleaning System
Baptistry
Spa

Approximate Hours Required To Heat a 1000 Gallon Baptistry – 30° Rise In Temp – 3.5 hrs.

A complete water heating system includes:

  1. Little Giant #3 Hot-O-Matic
  2. Little Giant Pump

We offer our gas baptistry heaters in two different btu ratings, 65,000btu and 120,000btu.

With the use of our circulation pump, they can be installed in the most convenient location, and the plumbing routed to the baptistry.

These gas baptistry heaters will, and can last you more than 20 years with minimal upkeep.  For the fastest and most economical way of heating, our gas baptistries heaters are the best choice.

Caution!

Heater and all pipe work must be below the baptistry water level.
Do not ignite heater until heating system is full of water and circulation is started.
Heater and pump must be turned off prior to draining baptistry.

Important

To prevent coil sweating it is necessary to reduce the rate of water circulation. This can be done by installing a valve in the circulation line. Simply close down on the valve until water condensation stops accumulating on the heater coils.

Heater, pump and pipe work can be installed beside the baptistry wall. Piping, pump and aquastat must be below baptistry water level with no air traps.

Note

Heater, pump and pipe work can be installed beside the baptistry wall. Piping, pump and aquastat must be below baptistry water level with no air traps.

$1,530.00

Water Heater Operating Instructions

Trouble Shooting Guide

Water Heater Operating Instructions